Regenerate doxygen file

... and change some things

doc/Doxyfile

@@ -1,4 +1,4 @@
-# Doxyfile 1.9.3
+# Doxyfile 1.9.8
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -12,6 +12,16 @@
 # For lists, items can also be appended using:
 # TAG += value [value, ...]
 # Values that contain spaces should be placed between quotes (\" \").
+#
+# Note:
+#
+# Use doxygen to compare the used configuration file with the template
+# configuration file:
+# doxygen -x [configFile]
+# Use doxygen to compare the used configuration file with the template
+# configuration file without replacing the environment variables or CMake type
+# replacement variables:
+# doxygen -x_noenv [configFile]
 
 #---------------------------------------------------------------------------
 # Project related configuration options
@@ -38,13 +48,13 @@ PROJECT_NAME           = QSkinny
 # could be handy for archiving the generated documentation or if some version
 # control system is used.
 
-PROJECT_NUMBER         = 0.0.1
+PROJECT_NUMBER         = 0.8.0
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer a
 # quick idea about the purpose of the project. Keep the description short.
 
-PROJECT_BRIEF          =
+PROJECT_BRIEF          = C++/Qt UI toolkit
 
 # With the PROJECT_LOGO tag one can specify a logo or an icon that is included
 # in the documentation. The maximum height of the logo should not exceed 55
@@ -58,18 +68,30 @@ PROJECT_LOGO           =
 # entered, it will be relative to the location where doxygen was started. If
 # left blank the current directory will be used.
 
-OUTPUT_DIRECTORY       =
+OUTPUT_DIRECTORY       = api
 
-# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub-
+# If the CREATE_SUBDIRS tag is set to YES then doxygen will create up to 4096
-# directories (in 2 levels) under the output directory of each output format and
+# sub-directories (in 2 levels) under the output directory of each output format
-# will distribute the generated files over these directories. Enabling this
+# and will distribute the generated files over these directories. Enabling this
 # option can be useful when feeding doxygen a huge amount of source files, where
 # putting all generated files in the same directory would otherwise causes
-# performance problems for the file system.
+# performance problems for the file system. Adapt CREATE_SUBDIRS_LEVEL to
+# control the number of sub-directories.
 # The default value is: NO.
 
 CREATE_SUBDIRS         = NO
 
+# Controls the number of sub-directories that will be created when
+# CREATE_SUBDIRS tag is set to YES. Level 0 represents 16 directories, and every
+# level increment doubles the number of directories, resulting in 4096
+# directories at level 8 which is the default and also the maximum value. The
+# sub-directories are organized in 2 levels, the first level always has a fixed
+# number of 16 directories.
+# Minimum value: 0, maximum value: 8, default value: 8.
+# This tag requires that the tag CREATE_SUBDIRS is set to YES.
+
+CREATE_SUBDIRS_LEVEL   = 8
+
 # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
 # characters to appear in the names of generated files. If set to NO, non-ASCII
 # characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
@@ -81,14 +103,14 @@ ALLOW_UNICODE_NAMES    = NO
 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
 # documentation generated by doxygen is written. Doxygen will use this
 # information to generate all constant output in the proper language.
-# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
+# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Bulgarian,
-# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
+# Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, English
-# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
+# (United States), Esperanto, Farsi (Persian), Finnish, French, German, Greek,
-# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
+# Hindi, Hungarian, Indonesian, Italian, Japanese, Japanese-en (Japanese with
-# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
+# English messages), Korean, Korean-en (Korean with English messages), Latvian,
-# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
+# Lithuanian, Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese,
-# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
+# Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish,
-# Ukrainian and Vietnamese.
+# Swedish, Turkish, Ukrainian and Vietnamese.
 # The default value is: English.
 
 OUTPUT_LANGUAGE        = English
@@ -336,6 +358,17 @@ MARKDOWN_SUPPORT       = YES
 
 TOC_INCLUDE_HEADINGS   = 5
 
+# The MARKDOWN_ID_STYLE tag can be used to specify the algorithm used to
+# generate identifiers for the Markdown headings. Note: Every identifier is
+# unique.
+# Possible values are: DOXYGEN use a fixed 'autotoc_md' string followed by a
+# sequence number starting at 0 and GITHUB use the lower case version of title
+# with any whitespace replaced by '-' and punctuation characters removed.
+# The default value is: DOXYGEN.
+# This tag requires that the tag MARKDOWN_SUPPORT is set to YES.
+
+MARKDOWN_ID_STYLE      = DOXYGEN
+
 # When enabled doxygen tries to link words that correspond to documented
 # classes, or namespaces to their corresponding documentation. Such a link can
 # be prevented in individual cases by putting a % sign in front of the word or
@@ -447,7 +480,7 @@ TYPEDEF_HIDES_STRUCT   = NO
 
 LOOKUP_CACHE_SIZE      = 0
 
-# The NUM_PROC_THREADS specifies the number threads doxygen is allowed to use
+# The NUM_PROC_THREADS specifies the number of threads doxygen is allowed to use
 # during processing. When set to 0 doxygen will based this on the number of
 # cores available in the system. You can set it explicitly to a value larger
 # than 0 to get more control over the balance between CPU load and processing
@@ -460,6 +493,14 @@ LOOKUP_CACHE_SIZE      = 0
 
 NUM_PROC_THREADS       = 1
 
+# If the TIMESTAMP tag is set different from NO then each generated page will
+# contain the date or date and time when the page was generated. Setting this to
+# NO can help when comparing the output of multiple runs.
+# Possible values are: YES, NO, DATETIME and DATE.
+# The default value is: NO.
+
+TIMESTAMP              = NO
+
 #---------------------------------------------------------------------------
 # Build related configuration options
 #---------------------------------------------------------------------------
@@ -541,7 +582,8 @@ HIDE_UNDOC_MEMBERS     = NO
 # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
 # undocumented classes that are normally visible in the class hierarchy. If set
 # to NO, these classes will be included in the various overviews. This option
-# has no effect if EXTRACT_ALL is enabled.
+# will also hide undocumented C++ concepts if enabled. This option has no effect
+# if EXTRACT_ALL is enabled.
 # The default value is: NO.
 
 HIDE_UNDOC_CLASSES     = NO
@@ -572,14 +614,15 @@ INTERNAL_DOCS          = NO
 # filesystem is case sensitive (i.e. it supports files in the same directory
 # whose names only differ in casing), the option must be set to YES to properly
 # deal with such files in case they appear in the input. For filesystems that
-# are not case sensitive the option should be be set to NO to properly deal with
+# are not case sensitive the option should be set to NO to properly deal with
 # output files written for symbols that only differ in casing, such as for two
 # classes, one named CLASS and the other named Class, and to also support
 # references to files without having to specify the exact matching casing. On
 # Windows (including Cygwin) and MacOS, users should typically set this option
 # to NO, whereas on Linux or other Unix flavors it should typically be set to
 # YES.
-# The default value is: system dependent.
+# Possible values are: SYSTEM, NO and YES.
+# The default value is: SYSTEM.
 
 CASE_SENSE_NAMES       = YES
 
@@ -831,11 +874,26 @@ WARN_IF_INCOMPLETE_DOC = YES
 
 WARN_NO_PARAMDOC       = NO
 
+# If WARN_IF_UNDOC_ENUM_VAL option is set to YES, doxygen will warn about
+# undocumented enumeration values. If set to NO, doxygen will accept
+# undocumented enumeration values. If EXTRACT_ALL is set to YES then this flag
+# will automatically be disabled.
+# The default value is: NO.
+
+WARN_IF_UNDOC_ENUM_VAL = NO
+
 # If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when
 # a warning is encountered. If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS
 # then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but
 # at the end of the doxygen process doxygen will return with a non-zero status.
-# Possible values are: NO, YES and FAIL_ON_WARNINGS.
+# If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS_PRINT then doxygen behaves
+# like FAIL_ON_WARNINGS but in case no WARN_LOGFILE is defined doxygen will not
+# write the warning messages in between other messages but write them at the end
+# of a run, in case a WARN_LOGFILE is defined the warning messages will be
+# besides being in the defined file also be shown at the end of a run, unless
+# the WARN_LOGFILE is defined as - i.e. standard output (stdout) in that case
+# the behavior will remain as with the setting FAIL_ON_WARNINGS.
+# Possible values are: NO, YES, FAIL_ON_WARNINGS and FAIL_ON_WARNINGS_PRINT.
 # The default value is: NO.
 
 WARN_AS_ERROR          = NO
@@ -846,10 +904,21 @@ WARN_AS_ERROR          = NO
 # and the warning text. Optionally the format may contain $version, which will
 # be replaced by the version of the file (if it could be obtained via
 # FILE_VERSION_FILTER)
+# See also: WARN_LINE_FORMAT
 # The default value is: $file:$line: $text.
 
 WARN_FORMAT            = "$file:$line: $text"
 
+# In the $text part of the WARN_FORMAT command it is possible that a reference
+# to a more specific place is given. To make it easier to jump to this place
+# (outside of doxygen) the user can define a custom "cut" / "paste" string.
+# Example:
+# WARN_LINE_FORMAT = "'vi $file +$line'"
+# See also: WARN_FORMAT
+# The default value is: at line $line of file $file.
+
+WARN_LINE_FORMAT       = "at line $line of file $file"
+
 # The WARN_LOGFILE tag can be used to specify a file to which warning and error
 # messages should be written. If left blank the output is written to standard
 # error (stderr). In case the file specified cannot be opened for writing the
@@ -878,10 +947,21 @@ INPUT                  = . \
 # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
 # documentation (see:
 # https://www.gnu.org/software/libiconv/) for the list of possible encodings.
+# See also: INPUT_FILE_ENCODING
 # The default value is: UTF-8.
 
 INPUT_ENCODING         = UTF-8
 
+# This tag can be used to specify the character encoding of the source files
+# that doxygen parses The INPUT_FILE_ENCODING tag can be used to specify
+# character encoding on a per file pattern basis. Doxygen will compare the file
+# name with each pattern and apply the encoding instead of the default
+# INPUT_ENCODING) if there is a match. The character encodings are a list of the
+# form: pattern=encoding (like *.php=ISO-8859-1). See cfg_input_encoding
+# "INPUT_ENCODING" for further information on supported encodings.
+
+INPUT_FILE_ENCODING    =
+
 # If the value of the INPUT tag contains directories, you can use the
 # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
 # *.h) to filter out the source-files in the directories.
@@ -893,12 +973,12 @@ INPUT_ENCODING         = UTF-8
 # Note the list of default checked file patterns might differ from the list of
 # default file extension mappings.
 #
-# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp,
+# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cxxm,
-# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h,
+# *.cpp, *.cppm, *.c++, *.c++m, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl,
-# *.hh, *.hxx, *.hpp, *.h++, *.l, *.cs, *.d, *.php, *.php4, *.php5, *.phtml,
+# *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, *.h++, *.ixx, *.l, *.cs, *.d, *.php,
-# *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C
+# *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to be
-# comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, *.f18, *.f, *.for, *.vhd,
+# provided as doxygen C comment), *.py, *.pyw, *.f90, *.f95, *.f03, *.f08,
-# *.vhdl, *.ucf, *.qsf and *.ice.
+# *.f18, *.f, *.for, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice.
 
 FILE_PATTERNS          =
 
@@ -931,20 +1011,22 @@ EXCLUDE_SYMLINKS       = NO
 # Note that the wildcards are matched against the file with absolute path, so to
 # exclude all test directories for example use the pattern */test/*
 
-EXCLUDE_PATTERNS       = *Private.* moc*.cpp *.moc
+EXCLUDE_PATTERNS       = *Private.* \
+                         moc*.cpp \
+                         *.moc
 
 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
 # (namespaces, classes, functions, etc.) that should be excluded from the
 # output. The symbol name can be a fully qualified name, a word, or if the
 # wildcard * is used, a substring. Examples: ANamespace, AClass,
 # ANamespace::AClass, ANamespace::*Test
-#
-# Note that the wildcards are matched against the file with absolute path, so to
-# exclude all test directories use the pattern */test/*
 
 EXCLUDE_SYMBOLS        = QskPainterCommand::PixmapData \
                          QskPainterCommand::ImageData \
-                         QskPainterCommand::StateData
+                         QskPainterCommand::StateData \
+                         QHash \
+                         QList \
+                         std
 
 # The EXAMPLE_PATH tag can be used to specify one or more files or directories
 # that contain example code fragments that are included (see the \include
@@ -987,6 +1069,11 @@ IMAGE_PATH             = images
 # code is scanned, but not when the output code is generated. If lines are added
 # or removed, the anchors will not be placed correctly.
 #
+# Note that doxygen will use the data processed and written to standard output
+# for further processing, therefore nothing else, like debug statements or used
+# commands (so in case of a Windows batch file always use @echo OFF), should be
+# written to standard output.
+#
 # Note that for custom extensions or not directly supported extensions you also
 # need to set EXTENSION_MAPPING for the extension otherwise the files are not
 # properly processed by doxygen.
@@ -1028,6 +1115,15 @@ FILTER_SOURCE_PATTERNS =
 
 USE_MDFILE_AS_MAINPAGE =
 
+# The Fortran standard specifies that for fixed formatted Fortran code all
+# characters from position 72 are to be considered as comment. A common
+# extension is to allow longer lines before the automatic comment starts. The
+# setting FORTRAN_COMMENT_AFTER will also make it possible that longer lines can
+# be processed before the automatic comment starts.
+# Minimum value: 7, maximum value: 10000, default value: 72.
+
+FORTRAN_COMMENT_AFTER  = 72
+
 #---------------------------------------------------------------------------
 # Configuration options related to source browsing
 #---------------------------------------------------------------------------
@@ -1114,6 +1210,46 @@ USE_HTAGS              = NO
 
 VERBATIM_HEADERS       = YES
 
+# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
+# clang parser (see:
+# http://clang.llvm.org/) for more accurate parsing at the cost of reduced
+# performance. This can be particularly helpful with template rich C++ code for
+# which doxygen's built-in parser lacks the necessary type information.
+# Note: The availability of this option depends on whether or not doxygen was
+# generated with the -Duse_libclang=ON option for CMake.
+# The default value is: NO.
+
+CLANG_ASSISTED_PARSING = NO
+
+# If the CLANG_ASSISTED_PARSING tag is set to YES and the CLANG_ADD_INC_PATHS
+# tag is set to YES then doxygen will add the directory of each input to the
+# include path.
+# The default value is: YES.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_ADD_INC_PATHS    = YES
+
+# If clang assisted parsing is enabled you can provide the compiler with command
+# line options that you would normally use when invoking the compiler. Note that
+# the include paths will already be set by doxygen for the files and directories
+# specified with INPUT and INCLUDE_PATH.
+# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
+
+CLANG_OPTIONS          =
+
+# If clang assisted parsing is enabled you can provide the clang parser with the
+# path to the directory containing a file called compile_commands.json. This
+# file is the compilation database (see:
+# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) containing the
+# options used when the source files were built. This is equivalent to
+# specifying the -p option to a clang tool, such as clang-check. These options
+# will then be passed to the parser. Any options specified with CLANG_OPTIONS
+# will be added as well.
+# Note: The availability of this option depends on whether or not doxygen was
+# generated with the -Duse_libclang=ON option for CMake.
+
+CLANG_DATABASE_PATH    =
+
 #---------------------------------------------------------------------------
 # Configuration options related to the alphabetical class index
 #---------------------------------------------------------------------------
@@ -1125,10 +1261,11 @@ VERBATIM_HEADERS       = YES
 
 ALPHABETICAL_INDEX     = YES
 
-# In case all classes in a project start with a common prefix, all classes will
+# The IGNORE_PREFIX tag can be used to specify a prefix (or a list of prefixes)
-# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
+# that should be ignored while generating the index headers. The IGNORE_PREFIX
-# can be used to specify a prefix (or a list of prefixes) that should be ignored
+# tag works for classes, function and member names. The entity will be placed in
-# while generating the index headers.
+# the alphabetical list under the first letter of the entity name that remains
+# after removing the prefix.
 # This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
 
 IGNORE_PREFIX          = Qsk \
@@ -1208,7 +1345,12 @@ HTML_STYLESHEET        =
 # Doxygen will copy the style sheet files to the output directory.
 # Note: The order of the extra style sheet files is of importance (e.g. the last
 # style sheet in the list overrules the setting of the previous ones in the
-# list). For an example see the documentation.
+# list).
+# Note: Since the styling of scrollbars can currently not be overruled in
+# Webkit/Chromium, the styling will be left out of the default doxygen.css if
+# one or more extra stylesheets have been specified. So if scrollbar
+# customization is desired it has to be added explicitly. For an example see the
+# documentation.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
 HTML_EXTRA_STYLESHEET  =
@@ -1223,6 +1365,19 @@ HTML_EXTRA_STYLESHEET  =
 
 HTML_EXTRA_FILES       =
 
+# The HTML_COLORSTYLE tag can be used to specify if the generated HTML output
+# should be rendered with a dark or light theme.
+# Possible values are: LIGHT always generate light mode output, DARK always
+# generate dark mode output, AUTO_LIGHT automatically set the mode according to
+# the user preference, use light mode if no preference is set (the default),
+# AUTO_DARK automatically set the mode according to the user preference, use
+# dark mode if no preference is set and TOGGLE allow to user to switch between
+# light and dark mode via a button.
+# The default value is: AUTO_LIGHT.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_COLORSTYLE        = AUTO_LIGHT
+
 # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
 # will adjust the colors in the style sheet and background images according to
 # this color. Hue is specified as an angle on a color-wheel, see
@@ -1232,7 +1387,7 @@ HTML_EXTRA_FILES       =
 # Minimum value: 0, maximum value: 359, default value: 220.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
-HTML_COLORSTYLE_HUE    = 30
+HTML_COLORSTYLE_HUE    = 220
 
 # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
 # in the HTML output. For a value of 0 the output will use gray-scales only. A
@@ -1251,16 +1406,7 @@ HTML_COLORSTYLE_SAT    = 100
 # Minimum value: 40, maximum value: 240, default value: 80.
 # This tag requires that the tag GENERATE_HTML is set to YES.
 
-HTML_COLORSTYLE_GAMMA  = 130
+HTML_COLORSTYLE_GAMMA  = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting this
-# to YES can help to show when doxygen was last run and thus if the
-# documentation is up to date.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-HTML_TIMESTAMP         = NO
 
 # If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML
 # documentation will contain a main index with vertical navigation menus that
@@ -1281,6 +1427,13 @@ HTML_DYNAMIC_MENUS     = YES
 
 HTML_DYNAMIC_SECTIONS  = NO
 
+# If the HTML_CODE_FOLDING tag is set to YES then classes and functions can be
+# dynamically folded and expanded in the generated HTML source code.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+HTML_CODE_FOLDING      = YES
+
 # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
 # shown in the various tree structured indices initially; the user can expand
 # and collapse entries dynamically later on. Doxygen will expand the tree to
@@ -1411,6 +1564,16 @@ BINARY_TOC             = NO
 
 TOC_EXPAND             = NO
 
+# The SITEMAP_URL tag is used to specify the full URL of the place where the
+# generated documentation will be placed on the server by the user during the
+# deployment of the documentation. The generated sitemap is called sitemap.xml
+# and placed on the directory specified by HTML_OUTPUT. In case no SITEMAP_URL
+# is specified no sitemap is generated. For information about the sitemap
+# protocol see https://www.sitemaps.org
+# This tag requires that the tag GENERATE_HTML is set to YES.
+
+SITEMAP_URL            =
+
 # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
 # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
 # can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
@@ -1586,17 +1749,6 @@ HTML_FORMULA_FORMAT    = svg
 
 FORMULA_FONTSIZE       = 10
 
-# Use the FORMULA_TRANSPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are not
-# supported properly for IE 6.0, but are supported on all modern browsers.
-#
-# Note that when changing this option you need to delete any form_*.png files in
-# the HTML output directory before the changes have effect.
-# The default value is: YES.
-# This tag requires that the tag GENERATE_HTML is set to YES.
-
-FORMULA_TRANSPARENT    = YES
-
 # The FORMULA_MACROFILE can contain LaTeX \newcommand and \renewcommand commands
 # to create new LaTeX commands to be used in formulas as building blocks. See
 # the section "Including formulas" for details.
@@ -1910,9 +2062,16 @@ PDF_HYPERLINKS         = YES
 
 USE_PDFLATEX           = YES
 
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
+# The LATEX_BATCHMODE tag signals the behavior of LaTeX in case of an error.
-# command to the generated LaTeX files. This will instruct LaTeX to keep running
+# Possible values are: NO same as ERROR_STOP, YES same as BATCH, BATCH In batch
-# if errors occur, instead of asking the user for help.
+# mode nothing is printed on the terminal, errors are scrolled as if <return> is
+# hit at every error; missing files that TeX tries to input or request from
+# keyboard input (\read on a not open input stream) cause the job to abort,
+# NON_STOP In nonstop mode the diagnostic message will appear on the terminal,
+# but there is no possibility of user interaction just like in batch mode,
+# SCROLL In scroll mode, TeX will stop only for missing files to input or if
+# keyboard input is necessary and ERROR_STOP In errorstop mode, TeX will stop at
+# each error, asking for user intervention.
 # The default value is: NO.
 # This tag requires that the tag GENERATE_LATEX is set to YES.
 
@@ -1933,14 +2092,6 @@ LATEX_HIDE_INDICES     = NO
 
 LATEX_BIB_STYLE        = plain
 
-# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated
-# page will contain the date and time when the page was generated. Setting this
-# to NO can help when comparing the output of multiple runs.
-# The default value is: NO.
-# This tag requires that the tag GENERATE_LATEX is set to YES.
-
-LATEX_TIMESTAMP        = NO
-
 # The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute)
 # path from which the emoji images will be read. If a relative path is entered,
 # it will be relative to the LATEX_OUTPUT directory. If left blank the
@@ -2106,13 +2257,39 @@ DOCBOOK_OUTPUT         = docbook
 #---------------------------------------------------------------------------
 
 # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
-# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures
+# AutoGen Definitions (see https://autogen.sourceforge.net/) file that captures
 # the structure of the code including all documentation. Note that this feature
 # is still experimental and incomplete at the moment.
 # The default value is: NO.
 
 GENERATE_AUTOGEN_DEF   = NO
 
+#---------------------------------------------------------------------------
+# Configuration options related to Sqlite3 output
+#---------------------------------------------------------------------------
+
+# If the GENERATE_SQLITE3 tag is set to YES doxygen will generate a Sqlite3
+# database with symbols found by doxygen stored in tables.
+# The default value is: NO.
+
+GENERATE_SQLITE3       = NO
+
+# The SQLITE3_OUTPUT tag is used to specify where the Sqlite3 database will be
+# put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put
+# in front of it.
+# The default directory is: sqlite3.
+# This tag requires that the tag GENERATE_SQLITE3 is set to YES.
+
+SQLITE3_OUTPUT         = sqlite3
+
+# The SQLITE3_OVERWRITE_DB tag is set to YES, the existing doxygen_sqlite3.db
+# database file will be recreated with each doxygen run. If set to NO, doxygen
+# will warn if an a database file is already found and not modify it.
+# The default value is: YES.
+# This tag requires that the tag GENERATE_SQLITE3 is set to YES.
+
+SQLITE3_RECREATE_DB    = YES
+
 #---------------------------------------------------------------------------
 # Configuration options related to the Perl module output
 #---------------------------------------------------------------------------
@@ -2187,7 +2364,8 @@ SEARCH_INCLUDES        = YES
 
 # The INCLUDE_PATH tag can be used to specify one or more directories that
 # contain include files that are not input files but should be processed by the
-# preprocessor.
+# preprocessor. Note that the INCLUDE_PATH is not recursive, so the setting of
+# RECURSIVE has no effect here.
 # This tag requires that the tag SEARCH_INCLUDES is set to YES.
 
 INCLUDE_PATH           =
@@ -2255,15 +2433,15 @@ TAGFILES               =
 
 GENERATE_TAGFILE       =
 
-# If the ALLEXTERNALS tag is set to YES, all external class will be listed in
+# If the ALLEXTERNALS tag is set to YES, all external classes and namespaces
-# the class index. If set to NO, only the inherited external classes will be
+# will be listed in the class and namespace index. If set to NO, only the
-# listed.
+# inherited external classes will be listed.
 # The default value is: NO.
 
 ALLEXTERNALS           = NO
 
 # If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed
-# in the modules index. If set to NO, only the current project's groups will be
+# in the topic index. If set to NO, only the current project's groups will be
 # listed.
 # The default value is: YES.
 
@@ -2277,16 +2455,9 @@ EXTERNAL_GROUPS        = YES
 EXTERNAL_PAGES         = YES
 
 #---------------------------------------------------------------------------
-# Configuration options related to the dot tool
+# Configuration options related to diagram generator tools
 #---------------------------------------------------------------------------
 
-# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# then run dia to produce the diagram and insert it in the documentation. The
-# DIA_PATH tag allows you to specify the directory where the dia binary resides.
-# If left empty dia is assumed to be found in the default search path.
-
-DIA_PATH               =
-
 # If set to YES the inheritance and collaboration graphs will hide inheritance
 # and usage relations if the target is undocumented or is not a class.
 # The default value is: YES.
@@ -2295,10 +2466,10 @@ HIDE_UNDOC_RELATIONS   = YES
 
 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
 # available from the path. This tool is part of Graphviz (see:
-# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
+# https://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
 # Bell Labs. The other options in this section have no effect if this option is
 # set to NO
-# The default value is: NO.
+# The default value is: YES.
 
 HAVE_DOT               = YES
 
@@ -2312,37 +2483,51 @@ HAVE_DOT               = YES
 
 DOT_NUM_THREADS        = 0
 
-# When you want a differently looking font in the dot files that doxygen
+# DOT_COMMON_ATTR is common attributes for nodes, edges and labels of
-# generates you can specify the font name using DOT_FONTNAME. You need to make
+# subgraphs. When you want a differently looking font in the dot files that
-# sure dot is able to find the font, which can be done by putting it in a
+# doxygen generates you can specify fontname, fontcolor and fontsize attributes.
-# standard location or by setting the DOTFONTPATH environment variable or by
+# For details please see <a href=https://graphviz.org/doc/info/attrs.html>Node,
-# setting DOT_FONTPATH to the directory containing the font.
+# Edge and Graph Attributes specification</a> You need to make sure dot is able
-# The default value is: Helvetica.
+# to find the font, which can be done by putting it in a standard location or by
+# setting the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
+# directory containing the font. Default graphviz fontsize is 14.
+# The default value is: fontname=Helvetica,fontsize=10.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
-DOT_FONTNAME           = Helvetica
+DOT_COMMON_ATTR        = "fontname=Helvetica,fontsize=10"
 
-# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
+# DOT_EDGE_ATTR is concatenated with DOT_COMMON_ATTR. For elegant style you can
-# dot graphs.
+# add 'arrowhead=open, arrowtail=open, arrowsize=0.5'. <a
-# Minimum value: 4, maximum value: 24, default value: 10.
+# href=https://graphviz.org/doc/info/arrows.html>Complete documentation about
+# arrows shapes.</a>
+# The default value is: labelfontname=Helvetica,labelfontsize=10.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
-DOT_FONTSIZE           = 10
+DOT_EDGE_ATTR          = "labelfontname=Helvetica,labelfontsize=10"
 
-# By default doxygen will tell dot to use the default font as specified with
+# DOT_NODE_ATTR is concatenated with DOT_COMMON_ATTR. For view without boxes
-# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
+# around nodes set 'shape=plain' or 'shape=plaintext' <a
-# the path where dot can find it using this tag.
+# href=https://www.graphviz.org/doc/info/shapes.html>Shapes specification</a>
+# The default value is: shape=box,height=0.2,width=0.4.
+# This tag requires that the tag HAVE_DOT is set to YES.
+
+DOT_NODE_ATTR          = "shape=box,height=0.2,width=0.4"
+
+# You can set the path where dot can find font specified with fontname in
+# DOT_COMMON_ATTR and others dot attributes.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
 DOT_FONTPATH           =
 
-# If the CLASS_GRAPH tag is set to YES (or GRAPH) then doxygen will generate a
+# If the CLASS_GRAPH tag is set to YES or GRAPH or BUILTIN then doxygen will
-# graph for each documented class showing the direct and indirect inheritance
+# generate a graph for each documented class showing the direct and indirect
-# relations. In case HAVE_DOT is set as well dot will be used to draw the graph,
+# inheritance relations. In case the CLASS_GRAPH tag is set to YES or GRAPH and
-# otherwise the built-in generator will be used. If the CLASS_GRAPH tag is set
+# HAVE_DOT is enabled as well, then dot will be used to draw the graph. In case
-# to TEXT the direct and indirect inheritance relations will be shown as texts /
+# the CLASS_GRAPH tag is set to YES and HAVE_DOT is disabled or if the
-# links.
+# CLASS_GRAPH tag is set to BUILTIN, then the built-in generator will be used.
-# Possible values are: NO, YES, TEXT and GRAPH.
+# If the CLASS_GRAPH tag is set to TEXT the direct and indirect inheritance
+# relations will be shown as texts / links.
+# Possible values are: NO, YES, TEXT, GRAPH and BUILTIN.
 # The default value is: YES.
 
 CLASS_GRAPH            = YES
@@ -2350,14 +2535,21 @@ CLASS_GRAPH            = YES
 # If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
 # graph for each documented class showing the direct and indirect implementation
 # dependencies (inheritance, containment, and class references variables) of the
-# class with other documented classes.
+# class with other documented classes. Explicit enabling a collaboration graph,
+# when COLLABORATION_GRAPH is set to NO, can be accomplished by means of the
+# command \collaborationgraph. Disabling a collaboration graph can be
+# accomplished by means of the command \hidecollaborationgraph.
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
 COLLABORATION_GRAPH    = NO
 
 # If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
-# groups, showing the direct groups dependencies.
+# groups, showing the direct groups dependencies. Explicit enabling a group
+# dependency graph, when GROUP_GRAPHS is set to NO, can be accomplished by means
+# of the command \groupgraph. Disabling a directory graph can be accomplished by
+# means of the command \hidegroupgraph. See also the chapter Grouping in the
+# manual.
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
@@ -2417,7 +2609,9 @@ TEMPLATE_RELATIONS     = NO
 # If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
 # YES then doxygen will generate a graph for each documented file showing the
 # direct and indirect include dependencies of the file with other documented
-# files.
+# files. Explicit enabling an include graph, when INCLUDE_GRAPH is is set to NO,
+# can be accomplished by means of the command \includegraph. Disabling an
+# include graph can be accomplished by means of the command \hideincludegraph.
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
@@ -2426,7 +2620,10 @@ INCLUDE_GRAPH          = YES
 # If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
 # set to YES then doxygen will generate a graph for each documented file showing
 # the direct and indirect include dependencies of the file with other documented
-# files.
+# files. Explicit enabling an included by graph, when INCLUDED_BY_GRAPH is set
+# to NO, can be accomplished by means of the command \includedbygraph. Disabling
+# an included by graph can be accomplished by means of the command
+# \hideincludedbygraph.
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
@@ -2466,7 +2663,10 @@ GRAPHICAL_HIERARCHY    = YES
 # If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
 # dependencies a directory has on other directories in a graphical way. The
 # dependency relations are determined by the #include relations between the
-# files in the directories.
+# files in the directories. Explicit enabling a directory graph, when
+# DIRECTORY_GRAPH is set to NO, can be accomplished by means of the command
+# \directorygraph. Disabling a directory graph can be accomplished by means of
+# the command \hidedirectorygraph.
 # The default value is: YES.
 # This tag requires that the tag HAVE_DOT is set to YES.
 
@@ -2482,12 +2682,13 @@ DIR_GRAPH_MAX_DEPTH    = 1
 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
 # generated by dot. For an explanation of the image formats see the section
 # output formats in the documentation of the dot tool (Graphviz (see:
-# http://www.graphviz.org/)).
+# https://www.graphviz.org/)).
 # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
 # to make the SVG files visible in IE 9+ (other browsers do not have this
 # requirement).
-# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo,
+# Possible values are: png, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd,
-# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
+# gif, gif:cairo, gif:cairo:gd, gif:gd, gif:gd:gd, svg, png:gd, png:gd:gd,
+# png:cairo, png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and
 # png:gdiplus:gdiplus.
 # The default value is: png.
 # This tag requires that the tag HAVE_DOT is set to YES.
@@ -2519,11 +2720,12 @@ DOT_PATH               =
 
 DOTFILE_DIRS           =
 
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# You can include diagrams made with dia in doxygen documentation. Doxygen will
-# contain msc files that are included in the documentation (see the \mscfile
+# then run dia to produce the diagram and insert it in the documentation. The
-# command).
+# DIA_PATH tag allows you to specify the directory where the dia binary resides.
+# If left empty dia is assumed to be found in the default search path.
 
-MSCFILE_DIRS           =
+DIA_PATH               =
 
 # The DIAFILE_DIRS tag can be used to specify one or more directories that
 # contain dia files that are included in the documentation (see the \diafile
@@ -2573,18 +2775,6 @@ DOT_GRAPH_MAX_NODES    = 20
 
 MAX_DOT_GRAPH_DEPTH    = 0
 
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not seem
-# to support this out of the box.
-#
-# Warning: Depending on the platform used, enabling this option may lead to
-# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
-# read).
-# The default value is: NO.
-# This tag requires that the tag HAVE_DOT is set to YES.
-
-DOT_TRANSPARENT        = YES
-
 # Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output
 # files in one run (i.e. multiple -o and -T options on the command line). This
 # makes dot run faster, but since only newer versions of dot (>1.8.10) support
@@ -2612,3 +2802,19 @@ GENERATE_LEGEND        = NO
 # The default value is: YES.
 
 DOT_CLEANUP            = YES
+
+# You can define message sequence charts within doxygen comments using the \msc
+# command. If the MSCGEN_TOOL tag is left empty (the default), then doxygen will
+# use a built-in version of mscgen tool to produce the charts. Alternatively,
+# the MSCGEN_TOOL tag can also specify the name an external tool. For instance,
+# specifying prog as the value, doxygen will call the tool as prog -T
+# <outfile_format> -o <outputfile> <inputfile>. The external tool should support
+# output file formats "png", "eps", "svg", and "ismap".
+
+MSCGEN_TOOL            =
+
+# The MSCFILE_DIRS tag can be used to specify one or more directories that
+# contain msc files that are included in the documentation (see the \mscfile
+# command).
+
+MSCFILE_DIRS           =